GLPI Agent 1.10 has been released.

Você pode baixá-lo no projeto github do Agente GLPI: https://github.com/glpi-project/glpi-agent/releases/tag/1.10

This version comes with few fixes and enhancements and here are the essential ones:

• OAuth2 authentication support is now included. It will only be usable with GLPI from the release of GLPI 11. It still can be tested with the GLPI main branch nightly build.
• The next inventory run date will shift less other time still keeping a little randomization.
• The agent won’t no more reset the inventory date when started hjourly in unmanaged mode (via crontab or planified task).
• On Windows, an important fix will now prevent NetDiscovery, NetInventory and Collect tasks to block service.
• Enhancement of disks serialnumber inventory support.
• Added Cortex XDR antivirus support, even on Windows “Server”, MacOSX and Linux.
• On Windows and linux, added remote management tools inventory support for Tactical RMM.
• The p2p mode on Deploy jobs has been fixed to use agent configured port. It has also been enhanced using now the remote-workers configuration to extend the number of threads used to discover peers if set to a number higher than 10.

Important: About antivirus on Windows “Server”, in the future, we will attempt to detect them checking if a dedicated service is enabled. If you still are with an undetected antivirus case on Windows “Server”, please open a github issue to help us start its support.

Sobre a embalagem, aqui está o que você deve reter:

• On Windows, perl is now built using Gcc v13.3, OpenSSL v3.3.1 and the libxml2 library v2.13.2. The liblzma library is now built using xz v5.6.2 sources.
• The Windows packaging now includes GLPI-AgentMonitor software v1.3.1.
• The MacOSX packaging now uses OpenSSL v3.3.1.
• The Deploy task can now be installed on RockyLinux 9.
• The AppImage installer for Linux now supports the --wait option for the unmanaged mode.

Você pode verificar os detalhes das alterações no Changelog oficial online disponível aqui: https://github.com/glpi-project/glpi-agent/blob/1.10/Changes

We invite you to update your agents as soon as possible to take advantage of these improvements.

Fique conectado! Siga-nos nas nossas redes sociais!

GLPI Agent 1.9 has been released.

Você pode baixá-lo no projeto github do Agente GLPI: https://github.com/glpi-project/glpi-agent/releases/tag/1.9

This version comes first with few fixes for the MSI packaging for Windows:

• A regression in the installation of OpenSSL support could prevent communication with servers via the SSL protocol.
• the FULL_INVENTORY_POSTPONE option of MSI installer was not normally managed.

Few fixes and enhancements for inventory was integrated:

• a regression of the partial inventory involved a problem in the integration of softwares into GLPI, in particular with the new full-inventory-postpone option.
• the detection of network ports type has been enhanced on MacOSX.
• the MSSQL databases inventory on Windows has been enhanced to detect all the installed instances.
• the serialnumber detection of recent disks has been enhanced on Windows.

A new snmp-retries has been introduced to enhance network inventory when networks devices not always respond in time.

The use of user notifications of the Deploy task could involve a service crash on Windows.

The ToolBox plugin now accepts some special characters inside passwords of credentials for remote inventory.

Você pode verificar os detalhes das alterações no Changelog oficial online disponível aqui: https://github.com/glpi-project/glpi-agent/blob/1.9/Changes

We invite you to update your agents as soon as possible to take advantage of these improvements.

Follow us on our social media so you don't miss any of our news!

GLPI Agent 1.8 has been released.

Você pode baixá-lo no projeto github do Agente GLPI: https://github.com/glpi-project/glpi-agent/releases/tag/1.8

This version comes with a lot of changes and enhancements for the MSI packaging for Windows:

• first of all, a huge work has been done to provide the windows installer with Perl 5.38.2 using latest essential libraries version for more security, like OpenSSL 3.2.1 and libssh2 1.11.0.
• the patch for the CVE-2024-28240 security advisory is now based on a DLL library.
• only 64 bits packaging for windows is provided.
• the “Typical” installation no more includes Deploy and Collect tasks.
• 7-zip provided command is now v23.01 version.
• GLPI-AgentMonitor tool is provided in 1.3.0 version and now the installer supports AGENTMONITOR_NEWTICKET_URLto configure the GLPI url for the open new ticket option.

On the inventory side, a new feature will help you reduce the carbon footprint of your GLPI system: the full inventory postpone

• now, by default, and if your server is a GLPI 10, GLPI Agent can decide to postpone the upload of a full inventory up to 14 times, so about 2 weeks using the default configuration. Until then, the agent will upload partial inventories only containing detected changes.
• full-inventory-postpone is a new configuration parameter which value is 14 by default. Setting it to 0, it is still possible to disable this feature coming back to previous normal running.
• glpi-agent script is also supporting --full option to temporary disable the feature.

The MacOSX package only activates Inventory task by default now. You’ll have to explicitly activate any other tasks you need in a dedicated configuration file.

A lot of fixes and enhancement have also been included. Inventory, RemoteInventory, NetworkDiscovery et NetInventory tasks, but also Proxy and ToolBox plugins, are concerned. We encourage you to check all changes details in the official online Changelog available here: https://github.com/glpi-project/glpi-agent/blob/1.8/Changes

We encourage you to update your agents as soon as possible to take advantage of these improvements.

Join us on our social networks so you don't miss any of our news!

GLPI Agent 1.7.3 has been released.

Você pode baixá-lo no projeto github do Agente GLPI: https://github.com/glpi-project/glpi-agent/releases/tag/1.7.3

This version essentially fixes a regression introduced in the MSI packaging for Windows in the 1.7.2 version:

• the LOCAL parameter was forced to the agent installation folder when not used. After that, local inventory was also generated even if this wasn’t required. This LOCAL configuration will be removed during this update.
• CVE-2024-28241 patch was modified to not be enabled if the installation folder and (if used) the LOCAL parameter remain under the default system folder as there’s not security issue in that case.

These updates only impact Windows installation performed with MSI packaging.

We invite you to upgrade your agents on Windows as soon as possible.

You don’t need to upgrade to 1.7.3 GLPI Agents that were not installed on Windows and which are at least in 1.7 version.

GLPI Agent 1.7.2 has been released!

Você pode baixá-lo no projeto github do Agente GLPI: https://github.com/glpi-project/glpi-agent/releases/tag/1.7.2

This version specifically fixes 2 critical security issues related to MSI packaging on windows:

• CVE-2024-28240: A local user could modify the GLPI Agent configuration to gain higher privileges.
• CVE-2024-28241: A local user could modify the GLPI-Agent installation to gain higher privileges, but only when GLPI Agent is not installed in the default installation folder.

These security issues impact all Windows installation performed with MSI packaging.

We encourage you to upgrade all these agents as soon as possible!

Anyway you don’t need to upgrade to 1.7.2 after updating to 1.7.1 if your GLPI Agent was not installed on windows with the MSI package.

GLPI Agent 1.6.1 has been released.

You're encouraged to upgrade your GLPI agents or migrate if you're still using FusionInventory agents.

Você pode baixá-lo no projeto github do Agente GLPI: https://github.com/glpi-project/glpi-agent/releases/tag/1.6.1

The 1.6.1 version specifically fixes SSL connections problems introduced with 1.6 version update for windows and MacOSX agents.

Here is a summary of the most important changes of the 1.6 version:

• The NetDiscovery and NetInventory tasks has been heavily reworked:
  • the Parallel: ForlManager library is used as more stable on some environments,
  • the NetDiscovery task now supports the discovery of remote computers and can run ESX and RemoteInventory tasks. This feature is currently only used by the ToolBox plugin.
  • network device support has been enhanced again for different manufacturers like Cisco, Zebra, Aruba, Checkpoint, Citrix and Synology.

• The ToolBox plugin now offers a full tasks management support and permits to configure the discovery of remote computers using ESX and RemoteInventory tasks. In ToolBox, the NetDiscovery task including automatic inventory tasks run is named “netscan”:
  • the inventory management page is now a list of local and remote inventory tasks,
  • the credentials management page permits to create credentials for ESX, WinRM and SSH,
  • a scheduling management page permits to define how to planify tasks runs,
  • the “remotes” page becomes obsolete and will be removed in next version,
  • a new option is available to add a navigation link toward the agent index page

• The RemoteInventory task includes a fix on SSH connections and supports the connection timeouts configured by ToolBox plugin,

• The ESX task has been enhanced to support the “netscan” task started from ToolBox plugin,

• The Proxy plugin has been fixed to support compressed requests and store JSON inventories with a better file name when local storage option is enabled,

• The Inventory task has also received many enhancements and fixes including:
  • the antivirus inventory support on MacOSX (Defender) and Linux (Defender and BitDefender),
  • the support for latest RustDesk versions for remote management discovery,
  • an enhanced support for LXC and LXD containers based virtualization on linux.

• The MacOSX package has been udpated to use OpenSSL 3.1.4 and zlib 1.3,

• The linux perl installer includes fixes and supports installation on many new systems,

• The MSI windows installer includes few updates:
  • the GLPI-AgentMonitor community tool has been updated to 1.2.3 version and now supports spanish and russian languages,
  • a new installer option permits to just reconfigure the installed agent,
  • the deletion of log, var e etc folders has been fixed during uninstallation,
  • the VBS script has been fixed to check installation and especially avoid an installation failure is the MSI service is still in use.

As always, you can check the more detailed changelog at: https://github.com/glpi-project/glpi-agent/blob/1.6.1/Changes